sia House – uncomplicated, simple and quick

2 Parquet flooring with a perfect surface finish

1

Basic sanding

  • Flatten all rough patches
  • Work along the grain
  • Resand along the wall using the manual machine
2

Pre-sanding

  • Fill any cracks and wood faults
  • When dry, sand again across the grain
3

Fine sanding

  • Finely sand the whole area
  • Resand along the wall using the manual machine
4

First coat of oil/varnish

  • Clean the surface thoroughly 
  • Apply oil or varnish according to the manufacturer's instructions
  • Important: Apply oil evenly
5

Intermediate sanding

  • Depending on the varnish and wear, prepare for an optional second coat
  • Observe the drying time according to the oil/paint manufacturer's instructions
  • Sand off any protruding wood fibres with fleece

Machine sanding

Very fine

6120 siafleece – siavlies discs
*****

6

Second coat of oil/varnish

  • Use slightly less oil/varnish than for the first  coat
  • Oil: Remove any remaining oil with a cloth after five  minutes

Parquet flooring with a perfect surface finish


Expert tip

For a perfect finish, place a delta triangle (P220) on (very fine) fleece.

1960 siarexx