sia House – uncomplicated, simple and quick

8 Plasterboard drywall construction, medium-fine finish (Q2)

Quality level 2 – For medium and coarse structured wall coverings (e.g. ingrain or textured wallpaper) or finishing coats with a grain size from 1 mm
1
Hand entfernt Leimreste von Gipsfaserplatte

Preparatory steps

  • Clean surface
  • Moisten transverse joints using a paintbrush
  • Apply filler at right angles to the joint and
  • wipe along the joint to remove
2
Hand entfernt Leimreste von Gipsfaserplatte

Joint cover strips

  • Insert glass fibre strips
  • Press in carefully with a smoothing trowel
3
Hand entfernt Leimreste von Gipsfaserplatte

Cover with filler

  • Allow the filler to dry
  • Skim the bodyfiller using a sharp edge
  • Cover over joints again with a slightly wider application of filler
4
Hand entfernt Leimreste von Gipsfaserplatte

Final sanding

  • Allow the covered surface to dry completely
  • Sand over the plastered surface
  • Caution: Do not sand into the board surface of the panels

Plasterboard with a perfect surface finish