| Selection | Width mm | Length mm | Hole pattern | Type | Grit | Color | Package unit | Order no. | |
|---|---|---|---|---|---|---|---|---|---|
| 10mm | 330mm | without holes | Cloth | 80 | blue | 10 | F 03E 001 RX4 / 7213.5249.0080 | ||
| 10mm | 330mm | without holes | Cloth | 120 | blue | 10 | F 03E 003 VE3 / 7213.5249.0120 | ||
| 10mm | 330mm | without holes | Cloth | 40 | blue | 50 | F 03E 004 W1T / 7213.5249.0040 | ||
| 10mm | 330mm | without holes | Cloth | 60 | blue | 50 | F 03E 004 W1U / 7213.5249.0060 | ||
| 10mm | 330mm | 80 | 50 | F 03E 004 W1V / 7213.5249.0080 | |||||
| 10mm | 330mm | without holes | Cloth | 120 | blue | 50 | F 03E 004 W1X / 7213.5249.0120 | ||
| Length mm | 330mm | |
| Width mm | 10mm | |
| Grit | 80 | |
| Type | Cloth | |
| Package unit | 10 | |
| F 03E 001 RX4 / 7213.5249.0080 | ||
| Length mm | 330mm | |
| Width mm | 10mm | |
| Grit | 120 | |
| Type | Cloth | |
| Package unit | 10 | |
| F 03E 003 VE3 / 7213.5249.0120 | ||
| Length mm | 330mm | |
| Width mm | 10mm | |
| Grit | 40 | |
| Type | Cloth | |
| Package unit | 50 | |
| F 03E 004 W1T / 7213.5249.0040 | ||
| Length mm | 330mm | |
| Width mm | 10mm | |
| Grit | 60 | |
| Type | Cloth | |
| Package unit | 50 | |
| F 03E 004 W1U / 7213.5249.0060 | ||
| Length mm | 330mm | |
| Width mm | 10mm | |
| Grit | 80 | |
| Package unit | 50 | |
| F 03E 004 W1V / 7213.5249.0080 | ||
| Length mm | 330mm | |
| Width mm | 10mm | |
| Grit | 120 | |
| Type | Cloth | |
| Package unit | 50 | |
| F 03E 004 W1X / 7213.5249.0120 | ||
The specialist in the coarse grit range for dry sanding on metals
The special 2829 siaron y series is especially suitable for unalloyed steels and non-ferrous metals. It ensures heat-reduced cutting with low discolouration and a high removal rate, edge stability and tear resistance.
Technology
- Active additives with a cooling effect greatly reduce discolouration
- Backing with very high stability and rigidity
- Suitable for general use in dry and wet sanding applications
- Weld preparation
- Removal of discolouration
- Stock removal
- Surface treatment
- Deburring
- Smoothing and blending of flaws
- Unalloyed / low-alloy steel
- Non-ferrous metal
Grit type:
Zirconia alumina
Backings:
X-wt cloth
Coating:
Closed
bonding:
Resin over resin
Special coating: