| Selection | Diameter | Hole pattern | Centre hole | Grit/fineness | Packing unit | Part number | |||
|---|---|---|---|---|---|---|---|---|---|
| 407mm | Centre hole | 25mm | 120 | 10 | F 03E 008 3GM / 2690.6226.0120 | ||||
| Diameter | 407mm | |
| Thickness | 25mm | |
| Grit/fineness | 120 | |
| Packing unit | 10 | |
| F 03E 008 3GM / 2690.6226.0120 | ||
The number 1 for sanding of MDF, HDF and chipboard
A specialist abrasive for keying MDF, HDF and chipboard, 1749 siaral f not only has a long lifetime, it also produces a high-quality surface finish.
Technology
TopTec
- Long life when sanding MDF boards and HDF boards and chipboard
- Perfect surfaces thanks to TopTec
- Dust-free process: Antistatic construction minimises dust build-up on belt, workpiece and machinery
- Best surface quality
- Very good finish on solid wood and veneer
- Keying of edges and surfaces on MDF board, HDF board and chipboard
- Calibrating
- Final sanding as preparation for painting
- Final sanding on transom and high-quality veneers
- Intermediate sanding of varnishes
- Chipboard
- MDF board
- Soft wood
- Hard wood
- Plastics
- Bodyfiller
- Primer filler
- PU lacquer
- Polyester lacquer
- UV lacquer
- Stone
- Mineral fibreboard
Grit type:
Silicon carbide
Backing:
f-wt paper (FSC-certified)
Coating:
Closed
Bonding:
Resin over resin
Special coating: